All content with label gateway.
Related Labels: troubleshoot, documentation, knx, th210, 5wg1146-1ab01, calimero, designer, knxnet, hager, 1_0, lingg, command, nk2, common, eibnet, control, elsner, manager, k, eibd, merten, n148, homescenario, association, n146, connection, eibmarkt, datalink, protocol, technical, nk1, boss, favourite, wireshark, cemi, ipad2, emi, router, controller, demo, configuration, eiblib, zwave, janke, siemens, overview, iknx, ip more »

Connection Gateway Manager Implementation (Forums) I would like to run some ideas past the OR community for development work I am currently doing, feel free to offer suggestions/ideas that you think might improve things. Current Situation A separate connection for each sensor ... Other labels: command, connection, manager

KNX Overview (Knowledge Base) Feel free to add documents and notes related to KNX here. This page is intended as a collection of generic KNX information. If you're looking for information about KNX support in OpenRemote products, please see OpenRemote Releases project:OpenRemote Releases. Notes ... Other labels: knx, protocol, association, technical, overview, calimero, wireshark, iknx

OpenRemote Z-Wave Demo (Project Information) mredeker put together a video that shows OpenRemote controller with an iPhone user interface controlling ZWave enabled hardware door sensor, light, dimmer and a motion sensor. The ZWave hardware is controlled via an IPtoZWave gateway from HomeScenario ... Other labels: zwave, designer, homescenario, ip, demo

Problems with 1) iPad2 and 2) Understanding KNX IP Connection (Forums) first, congratulations a bout this successful application. This will steal me some nights :) If its possible for me i'll try to support you. I tested the openRemoteBoss 2.0 with my iPad2 and my KNX environment at home. 1) After I had ... Other labels: knx, ipad2, controller, ip

Problems with 1) iPad2 and 2) Understandit KNX IP Connection (Forums) first, congratulations a bout this successful application. This will steal me some nights :) If its possible for me i'll try to support you. I tested the openRemoteBoss 2.0 with my iPad2 and my KNX environment at home. 1) After I had ... Other labels: ip, ipad2, knx, k

Problem with access to Lingg & Janke Nk1 (Forums) I am working with a Lingg & Janke NK1 (IP serverviewer) device which I have intergrated on to my KNX network. I have completed the parameters and when I try to access the NK1 through the {}openremote program{} I can't ... Other labels: knx, lingg, janke, nk1, nk2, router, eiblib, knxnet

Supported KNX Gateways and Routers in OpenRemote Boss 1.0 (Documentation) Supported KNX Gateways and Routers in OpenRemote™ 1.0 The following KNX hardware and software are known to work with OpenRemote™ 1.0: # Siemens N146 # Siemens N148 5WG11461AB01 Router # Eibmarkt N000401 # Merten KNX/IP Router REGK 680329 # Hager TH210 ... Other labels: knx, ip, router, boss, 1_0, siemens, n146, n148

Supported KNX Gateways and Routers in OpenRemote Boss 1.0 (OpenRemote Box) page has moved to docs:Supported KNX Gateways and Routers in OpenRemote Boss 1.0 Other labels: knx, ip, router, boss, 1_0, siemens, n146, n148

Troubleshoot OpenRemote Boss 1.0 Controller with KNX (OpenRemote Box) page has moved to docs:Troubleshoot OpenRemote Boss 1.0 Controller with KNX Other labels: knx, boss, 1_0, troubleshoot, documentation, configuration, ip, router

Troubleshoot OpenRemote Boss 1.0 Controller with KNX (Documentation) Troubleshoot OpenRemote Boss 1.0 Controller with KNX KNX autodiscovery is based on UDP multicast in the IP network and is defined in the KNX protocol specification. KNX/IP gateway or router will return its IP address and OpenRemote Boss will use that IP address ... Other labels: knx, boss, 1_0, troubleshoot, documentation, configuration, ip, router